Fujifilm aktualizuje firmware pro digitály modelové řady X a GF

19. listopadu 2018
Fujifilm aktualizuje firmware pro digitály modelové řady X a GF

Hned tři modely bezzrcadlovek Fujifilm se dočkají nového firmwaru – konkrétně se jedná o modely X-T3, X-H1 a GFX 50S. poslední jmenovaný dostává s novým firmwarem také funkci automatického ořezu snímku na velikost kinofilmového políčka při nasazení GF objektivů a adaptéru pro bajonet H. V případě model X-T3 se uživatelé nově dočkají 4K HDR videa a X-H1 dostane vylepšení vestavěného stabilizátoru obrazu.

Detailní specifikace nejnovějších verzí firmwaru je následující.

Fujifilm GFX 50S – firmware verze 3.30 (dostupný koncem listopadu 2018)

  1. Supports “35mm Format Mode” when using GF Lens and H mount adapter – “35mm Format Mode” crops the center of the sensor 36.0mm x 24.0mm (30.5M) and records JPEG and RAW file.
  2. Improved eye-sensor response – Reduced the time to switch between EVF and LCD when you select “eye-sensor” on the viewfinder display settings.
  3. Supports simultaneous delete for RAW and JPEG files – When RAW / JPEG is selected in the card slot setting (for still image), RAW/JPEG image can be deleted simultaneously. By selecting “OFF”, only the RAW image will be deleted.
  4. Supports EVF and LCD color adjustment – Color of EVF/LCD is adjustable from screen setting menu.

Fujifilm X-T3 – firmware verze 2.0 (dostupný v prosinci 2018)

  1. 4K HDR video recording in Hybrid Log Gamma (HLG) – Supports 4K HDR video recording in the Hybrid Log Gamma (HLG), one of the formats defined in the ITU-R BT.2100 international standards. It allows the capture of rich and realistic images in a scene where there is a huge gap between highlight and shadow, or subjects with high color saturation.
  2. Simultaneous output of Film Simulation and F-Log footage – Supports simultaneous output of Film Simulation and F-Log footage. It allows you to record in F-Log while checking Film Simulation image on an external monitor.
  3. Recording over 4GB movie file as one file – Movie files are no longer split when the file reaches 4GB file size. The file is recorded as one file providing an SD memory card greater than 32GB is used (excludes 32GB).
  4. Display color temperature (Kelvin) on EVF/LCD – Color temperature (Kelvin) can be displayed on EVF/LCD.
  5. Supports slower shutter speeds with DCI4K/4K 29.97P/25P/24P/23.98P – Slower shutter speeds than the framerate can be selected with 4K 29.97P/25P/24P/23.98P.
  6. Compatible with ALL-Intra and maximum bitrate 400Mbps with H.264 – Using H.264 compression, you will now to be able to select ALL-Intra at a maximum bitrate of 400Mbps.
  7. Display power supply icon – Power supply icon is displayed on EVF/LCD while using AC adapter (AC-9VS), or Anker PowerCore+ 26800 PD and Anker PowerCore Speed 20000 PD

Fujifilm X-H1 – firmware vrze 2.0 (dostupný v prosinci 2018)

  1. 1. In-body image stabilization and optical image stabilization now work together to improve overall stability –  With an XF or XC optical image stabilized lens, in-body image stabilization worked with 3 axis (up and down / optical axis rotation). The remaining 2 axis (right and left pitch, yaw angle) was controlled by optical image stabilization in the lens. This firmware has a new image stabilization algorithm to allow the in-body image stabilization to work in all 5 axis and to achieve more than five-stops (up to the equivalent of 5.5 stops) image stabilization by cooperative control according to the types of frequency and blur amount.


Témata článku: Technika, Bezzrcadlovky, Fujifilm, Firmware

Určitě si přečtěte